All three versions have a powerful drive with an output of 5.5 kW to 7.5 kW, depending on the version. In the case of the floor screed version with 7.5 kW output, an optional frequency converter (FU) can also be used. This enables output to be adjusted continuously in line with the product used. Naturally the P30 has connections for operation with a compressor and for fully automatic feeding by means of a mixer.

The clear and transparent layout of the controls enables easy operation. Because of its robust design and large material container, pump P30 is the perfect machine for building sites.

The large wheels support problem-free transport on the building site. Naturally, pump P30 is also designed to be transported using a crane. As is typical of all m-tec systems, the P30 has easy and quick to use tensioning wedges, or swiveling devices that enable important elements such as the worm pump to be replaced in just a few seconds.

EasyUse

Together, clearly structured controls and large wheels make the P30 easy to handle.

EasyPump
The use of a frequency converter (Optional) enables the pump motor to be started at full power and permits a continuously adjustable output.

Areas of use and applications
All pumpable dry mortars, such as:

• Floor screeds
• Lime gypsum plasters
• Cement plasters
• Lime plasters
• Lime cement plasters
• Bricklaying mortar
• Finishing plasters
• Reinforcing mortar and adhesive mortar
• Thin layer filling compounds
• Fine Concrete

* Depending on consistency, quality and composition of the material, pump model - and condition, diameter and length of the delivery hose and also the pumping height of the material.

Scope of delivery

Pump P30 incl. pump motor, material container
For details please contact your local sales representative or dealer.

Recommended accessories

• Mortar hoses
• Air hoses
• Sensor for mixer operation
• Compressor
• Remote control cable
• Fine plaster spray gun
• Adhesive gun