Mono-mix Render and Plaster Spraying Mixer Pump

M-tec Mono-mix Render and Plaster Spraying Mixer Pump – Available for Sale

The mono-mix is a compact, easy-to-use mixing pump and is perfectly suited to the processing of all machine-mixable interior and exterior plasters, as well as for adhesives and reinforcing mortar. The mono-mix can be used both with bagged material as well as soft materials.

ADD TO COMPARE
Share this product

Description

Mono-mix Render and Plaster Spraying Mixer Pump – the pump has four convenient output settings, enabling it to be adjusted to the relevant material. An optional after mixer is available for materials that are difficult to mix.

The transparent layout of the controls and the conscious avoidance of superfluous switches make for simple operation.
The large wheels mean that the mixer can be transported with ease at all times. In addition, the mono-mix can be dismantled into three trouble-free components on the building site in just a few simple steps.

As is typical of all m-tec systems, the mono-mix has easy and quick to use tensioning wedges, enabling important elements such as the worm pump or material container to be replaced in just a few seconds.

Easy Work
The powerful drive technology of the mono-mix ensures there is always enough power for challenging tasks, even in the 230 Volt version.

Easy Use
Together, clearly structured controls, 3-way dismantling, easy transport by crane and large wheels make the mono-mix easy to handle.

Easy Clean
The simple but logical structure enables the mono-mix to be cleaned quickly.
 
Thanks to its reliability, powerful drive and tried-and-tested m-tec detailed solutions, this small but impressive mixing pump has enjoyed many years of popularity! The mono-mix is available in two versions: 230 Volt or 400 Volt. In the 230 Volt version a frequency converter ensures that optimum performance can be achieved at any time: this is a huge advantage on building sites with a 230V power supply, e.g. during refurbishment projects or interior work.
 
Areas of use and applications
All pumpable dry mortars, such as:

  • Gypsum plasters.
  • Lime gypsum plasters.
  • Cement plasters.
  • Lime plasters.
  • Lime cement plasters.
  • Insulating plasters.
  • Finishing plasters.
  • Plaster for restoration.
  • Reinforcing mortar and adhesive mortar.
  • Floor screeds.
  • Levelling Compound.

 
Scope of delivery*
Mixing pump incl. compressor with automatic cut-off and water pump, rotor/ stator, spray gun, set of hoses, accessories

* No responsibility is taken for the correctness of this information.
For further information please contact your local sales representative or authorized dealer.
 
Recommended accessories

  • Rotors / stators.
  • After mixer.
  • Mortar hoses.
  • Adhesive gun.
  • Fine plaster spray gun.
  • Vibrator.

Video

Technical Data

Standard output: approx. 5 – 20 l/min / 22 l/min (mono-mix-FU/mono-mix) variable with other worm pumps
Conveying distance: * up to 20m
Conveying height: * up to 20 m
Conveying pressure: * up to 20 bar / 40 bar (mono-mix-FU/mono-mix)
Drive motor: 3.0 kW / 5.5 kW (mono-mix-FU/mono-mix)
Compressed air supply: 1.1 kW / 0.9 kW, approx. 250 l/min, 4 bar (mono-mix-FU/mono-mix)
Electrical connection: 230 V / 400 V, 50 Hz, 1 / 3 ph (mono-mix-FU/mono-mix)
Fuse: 16 A / 25 A (mono-mix-FU/mono-mix)
Connecting cable: 3 x 2.5 mm² / 5 x 2.5 mm² (mono-mix-FU/mono-mix)
Connector: 16 A 3 P 6 h / 16 A 5 P 6 h (mono-mix-FU/mono-mix)
Water supply: 3/4“ water hose with GEKA coupling, required water pressure min. 2.5 bar while the machine is running
Dimensions: approx. 1430 x 670 x 1,150 mm
Weight: approx. 160kg / 165 kg

 
* Depending on consistency, quality and composition of the material, pump model – and condition, diameter and length of the delivery hose and also the pumping height of the material.

Downloads

We’ve put together some useful information on this product available for download

Mono-Mix Data Sheet
Mono-Mix Flyer
Mono-Mix Parts List
Mono-Mix Operation Instructions

Markham Sheffield Ltd 01909 730861
Close
Compare